One of our most popular holiday posts is our tutorial on dying Easter eggs with pieces of silk. It’s a unique process that creates amazingly beautiful eggs and it’s always a shame when it’s time to toss them! Many readers have asked if it was possible to use the same process on a blown-out egg so they could be kept indefinitely. The problem that arises is that hollow eggs float, so they’re difficult to boil. But thanks to one resourceful reader, we’ve solved that problem. So today I thought I’d do a little tutorial about how to make blown eggs and then create charming little ornaments from them- including silk-dyed ones!
Supplies Needed
This is just a preview of supplies and method; keep scrolling for full printable instructions.
- Raw eggs – If you’re going to save the inside of the egg for cooking, then make sure to wash the outside of your egg and make sure that all of the tools you are using are clean and sanitized.
- Bowl of warm water – Warming the eggs for a few minutes makes the insides more loose, making them easier to remove.
- Infant bulb syringe – You know, the bulb shaped “baby snot sucker.” This is to force air into the egg and create pressure that blows the insides out the other end. You could also try a medical syringe. Personally I think the bulb syringe works better.
- Push pin – This is used to poke holes in each one of your eggs.
- Very small drill bit – I used this to widen the holes poked in the eggs after creating them with the pin.
- Paper clip – This is used to scramble the insides, making them easier to blow out.
- Decorating supplies – As needed. Sharpies, egg dyes, acrylic paints or paint pens, supplies for silk-dyed eggs, ribbons and an extra long crafting needle to thread them), beads, etc.
How to Make Blown Egg Ornaments
Step 1: Blow Out Your Eggs
- Place your eggs in a bowl of warm water for about 10 minutes before starting.
- Hold an egg firmly (you know, as firmly as you can hold an egg) and use your pin to gently pierce a hole in one end. It helps to gently twist the pin back and forth first to sort of screw it in before you actually push it through. Repeat on the other end of the egg.
- Once you have a teeny tiny pin hole, it helps to have a teeny tiny drill bit (seriously, the smallest one in the set). Gently “drill” through your pin hole to enlarge it.
- Now grab that paper clip and unfold it. Stick the paper clip inside the egg and swirl it all over the place. The object here is to scramble that yolk up which will help it all come out easily.
- Now grab that bulb syringe and place it directly over one of the holes and squeeze over a bowl. The egg will come right out the other end. If you meet any resistance, don’t keep blowing air or your egg might explode. Give it a shake, or stick the paper clip in again, or increase the size of your hole.
- Once everything is blown out, you might want to fill your syringe with warm water and blow it into the egg. Shake it up and then blow it out to get the inside clean.
Step 2: Decorate
- Once you’ve got your hollowed out egg you can do all sorts of crafty things with it. To make an ornament, thread ribbon, string, or twine through the holes. Using a extra long crafting needle really helps. If you need to enlarge your holes to fit the ribbon, use your pin to gently pick away at it. Just tie a knot at the bottom end and a loop at the top end.
- To make Silk Dyed eggs,follow the instructions in this tutorial. When it comes to the step where you boil the eggs in the pot, use a strainer turned upside-down to keep the eggs under the water. OR, if you can fill your eggs with water it will weigh them down as well. After they come out they will be filled with boiling water. Make sure to let them cool first, and then blow out the water. After they’re dry, thread ribbons through so you can display them!
- If you want to dye your eggs with normal colored dye, then dye uncooked eggs before you blow them out. Try adding beads to your string. It not only looks pretty, but it covers up messy holes! I love plain, solid color eggs- and they look really pretty with colored beads. These would be really cute with monograms drawn on- or cut out of vinyl.
- I’ve always wanted to learn Ukrainian egg painting, aka: Pysanka, but apparently I have too many hobbies already. So I settled for a Sharpie. Turns out all of those years of mindless doodling in school was actually useful. Way more useful than algebra at least.
Frequently Asked Questions
How do I store these ornaments?
I recommend packing them lightly in tissue paper inside a larger, sturdy box.
How to Make Blown Egg Ornaments
This method empties the inside of your eggs so you can decorate and then store for years to come!
Equipment
- Bowl of warm water – Warming the eggs for a few minutes makes the insides more loose, making them easier to remove.
- Infant bulb syringe – You know, the bulb shaped “baby snot sucker.” This is to force air into the egg and create pressure that blows the insides out the other end. You could also try a medical syringe. Personally I think the bulb syringe works better.
- Push pin – This is used to poke holes in each one of your eggs.
- Very small drill bit – I used this to widen the holes poked in the eggs after creating them with the pin.
- Paper clip – This is used to scramble the insides, making them easier to blow out.
- Decorating supplies – As needed. Sharpies, egg dyes, acrylic paints or paint pens, supplies for silk-dyed eggs, ribbons and an extra long crafting needle to thread them), beads, etc.
Ingredients
- Raw eggs If you’re going to save the inside of the egg for cooking then make sure to wash the outside of your egg and make sure that all of the tools you are using are clean and sanitized.
Instructions
- Place your eggs in a bowl of warm water for about 10 minutes before starting.
- Hold an egg firmly (you know, as firmly as you can hold an egg) and use your pin to gently pierce a hole in one end. It helps to gently twist the pin back and forth first to sort of screw it in before you actually push it through. Repeat on the other end of the egg.
- Once you have a teeny tiny pin hole, it helps to have a teeny tiny drill bit (seriously, the smallest one in the set). Gently “drill” through your pin hole to enlarge it.
- Now grab that paper clip and unfold it. Stick the paper clip inside the egg and swirl it all over the place. The object here is to scramble that yolk up which will help it all come out easily.
- Now grab that bulb syringe and place it directly over one of the holes and squeeze over a bowl. The egg will come right out the other end. If you meet any resistance, don’t keep blowing air or your egg might explode. Give it a shake, or stick the paper clip in again, or increase the size of your hole.
- Once everything is blown out, you might want to fill your syringe with warm water and blow it into the egg. Shake it up and then blow it out to get the inside clean.
- Allow eggs to dry and decorate as desired. To add ribbon, use an extra long crafting needle to thread it through the holes in the eggs. Add beads to help cover the holes in the egg.
Notes
Decorating Notes
- If you want to dye these eggs in a traditional manner, I recommend dyeing them before blowing them out.
- Click here for instructions on Silk-Dyed Eggs. Use a strainer (with a small pot on top of needed) to hold the blown eggs under the water while boiling.
Did You Make This Recipe?Snap a picture, and hashtag it #ourbestbites. We love to see your creations on our Instagram @ourbestbites!
Questions & Reviews
Love it! Thanks so much for posting!
On a different website I read where you can make a mixture of water and modge podge and pour inside(then drain) and paint on outside to make them stronger. Also if you are doing the blown out eggs and want to silk dye them instead of using the strainer to weight them down, you can add a washer or a stone or a fishing weight to the packet to hold down each egg as you boil/dye them.
Thanks great idea.
I ended up using a plate a a Pyrex measuring cup. After the boil for the sitting covered time.
Curious – “fragile as an eggshell”. How can I make these ornaments less fragile for storage? I don’t want them to break after working on them – same goes for the pysanki egg idea. I thought about making the hole slightly bigger to allow for the tiny nozzle on a “Great Stuff” expanding foam can, but as the description says, it’s -expanding- foam. I’m not sure if the internal pressure would be too much. Would shellac, polyurethane, or something like them make the shell stronger?
Anna, I just nestle them in tissue and store them in a hard-sided box. As long as your box can’t collapse on and smash them, they should be just fine.
Couldn’t you shellac the eggs after finishing them? Shellac comes in matte and glossy, and would make the shells a bit sturdier, I should think. Perhaps the shellac would make the dye run? Has anyone tried this?
I’m not a “crafty” person but I’m heading out to the drugstore tomorrow to buy a snot sucker! EUWWW what a revolting picture in my mind’s eye! Yes, single with spoiled puddytat here – haven’t had to use one of those things.
After that, I have to head for the thrift store to buy some ugly ties. Blowing out the eggs is a great idea – you can keep them and not have an . . . odour . . . in your home in a few weeks. ROFL
Thank you very much for the great idea.
Love this. Thank you for sharing. The link for the tutorial on silk dying blown eggs doesn’t work. Can you repost information. Thanks
Sorry Lisa, they should work now!
Pysanky is a spring ritual in our craft group. The designs typically include Christian symbols of crosses, crosshatch representing Fishers of Men nets, barbed lines representing the crown of thorns, waves representing baptismal water, etc. Wonderful hobby that you can do with your children.
I wanted to add that if you don’t have the snot-sucker, we used to just make one of the holes a little bigger and blow the egg gew out of the hole. I think I may try the snot sucker, but for those that didn’t have one handy I thought it might be helpful to know you can do it without one. Love these ideas with the silk dying can’t wait to work on it this year. And the fact that I can keep them makes me VERY happy. :o) Never thought of that.
Loved your idea of the snot sucker for blowing out the eggs. If you want to go one step further and spend $9.95, there is a FANTASTIC little tool called “Blas-Fix”, it is Gereman and known as an Egg Vac — works absolutely fantastically, and you only have one little tiny hole in the egg!
wonderful will have to try this out
Great tutorial. love it, thanks for sharing